Why has my Canon printer stopped working wirelessly?

The Canon printer not connecting to Wi-Fi issues can occur due to several reasons. To fix the problem, try to update the printer driver. If the issue persists, check for network issues, or as a last resort, try to uninstall and reinstall the printer and drivers.

What does the solid orange light on my Canon printer mean?

Ink may have run out (The lamp on the ink tank flashes). If printing is in progress, you are recommended to stop printing, replace the ink tank, and then print again.

Why is the triangle flashing orange on my Canon printer?

When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen.

How do I connect my Canon mg6120 to WIFI?

Wireless Easy Setup

  1. Use the up or down arrow (A) to display Setup, then tap the right FUNCTION button (B).
  2. Use the left or right arrow (C) to select Wireless LAN setup, then tap OK.
  3. Select Yes, then tap OK.
  4. When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.
  5. Select Easy setup, then tap OK.

Why has my printer stopped working wirelessly?

Troubleshoot Wireless Printer Problems

Run the Printing Troubleshooter. Check Router settings. Update router firmware. Disable VPN connections.

How do I reset my wireless Canon printer?

Here’s how to complete the factory reset:

  1. Step 1: Select “Setup” on your Canon printer. Then, navigate to the “Device settings” via the arrow keys and press “OK”.
  2. Step 2: Next, navigate to the “Reset settings” and press “OK”. Look for the “Reset” option and select “OK”.
  3. Step 3: Select “Yes”.

How do I fix the orange light on my printer?

Why is my printer flashing orange?

  1. Perform Power Reset. Remove the Cartridges from the printer.
  2. Check the Ink Cartridge for Fault. If you haven’t changed the Ink Cartridge for a long time now, it may be the right time to have a look at them and check them for quality issues.
  3. Uninstall and Reinstall Printer Driver.

Is there a reset button on a Canon Pixma printer?

Here’s how to perform a hard reset: Step 1: Press and hold the “Stop” button on your Canon printer until you hear the alarm ringing. Step 2: Release the “Start” button only after the alarm flashes or rings at least 19 times. Step 3: This should have restored your device to its original factory setup.

What does the triangle with lightning bolt mean?

As with all “warning signs”, this symbol is standardized in ISO 7010 inside a black- banded yellow triangle. Its intended message is “Warning; electricity” and it is used to warn people about the risk of coming into contact with electricity (e.g. electric shock, electrocution hazard, hazardous voltage).

How do I get my Canon printer to connect wirelessly?

If you have a Wireless access point or router that supports WPS, you can easily connect your Canon wireless printer to your home network.

  1. Tap. (A).
  2. Tap Wi-Fi.
  3. Tap Settings.
  4. Tap Wi-Fi setup.
  5. Tap WPS (Push button method).
  6. Tap OK.
  7. Press and hold the WPS button on the wireless router.
  8. Tap OK on the printer within 2 minutes.

How do I manually connect to my Canon wireless printer?


  1. With the printer turned on, press the Setup button.
  2. In the Setup menu, Wi-Fi setup is the first option.
  3. In the Wi-Fi setup menu, press the right arrow until Manual connect appears.
  4. The printer will search for nearby wireless networks.
  5. You will be prompted to enter your network password.

How do I reset my Canon wireless printer?

Canon Pixma MG3600 Reset WiFi !! – YouTube

Can you reset a wireless printer?

Press and hold the Wi-Fi button on the back of the printer for five seconds or until the control panel display shows a prompt. On the prompt, touch OK to restore the network default settings.

How do I do a hard reset on my Canon Pixma printer?

How to Reset My Canon Printer: Hard Reset

  1. Step 1: Press and hold the “Stop” button on your Canon printer until you hear the alarm ringing.
  2. Step 2: Release the “Start” button only after the alarm flashes or rings at least 19 times.
  3. Step 3: This should have restored your device to its original factory setup.

What is the meaning of orange light?

This orange light indication means the A check engine or malfunction indicator lamp so it indicates you to get your bike checked in an authorised service centre once. You can check service centre in this link- Service centres.

How do I know if my printer is clogged?

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it’s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it’s time to remove the excess ink.

How do I reset my Canon mg6120 printer?

Changing the Machine Settings on the LCD
Select Setup on the HOME screen. Select Device settings, then touch the OK button. The Device settings screen is displayed. button to select Reset settings , then touch the OK button.

How do I clear a Canon printer error?

How to Hard Reset Canon Printer Error – YouTube

What does the triangle on my printer mean?

Seeing a yellow triangle with an exclamation mark usually indicates that a hardware device needs to be updated. If you are seeing the mark in Device Manager, we recommend checking the device status of the printer driver. Here’s how: In Device Manager (Win+X > Device Manager), double-click on the printer driver.

Why is my printer not connecting wirelessly?

Remove and Re-Add Your Printer in Windows
If this happens, go to Settings > Devices > Printers & Scanners, select your printer, and remove it. Then click Add a Printer or Scanner to re-add it to the device list. Incredibly (and frustratingly), this often gets things up and running again.

How do I manually connect to my wireless printer?

Go to the Start menu and click Settings, Devices, then Printers & scanners. Select Add a printer or scanner and wait for your printer to appear in the list, then select it and hit Add device. If Windows doesn’t find your printer, select The printer that I want isn’t listed and follow the instructions.

Where is the reset button on my Canon Pixma printer?

You can perform a factory reset on a Canon Pixma printer by following these simple steps:

  1. Start your printer.
  2. Go to the menu, scroll with the arrows, and find and select ‘Device Settings.
  3. Press ‘OK.
  4. Select the ‘Resetting’ option.
  5. Press ‘OK’ to begin the device resetting process.
  6. Turn off your Pixma printer.

Why is my printer light orange?

When the printer shows orange light blinking, it mostly means some issues with the printer cartridge, toner, or simply corrupted configuration settings as reported by the user in the Microsoft Community.

What does orange LED light mean?

An orange LED indicates that your Motion is charging.

What does a clogged printhead look like?

Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again. Printheads clog due to infrequent cartridge use.