What is VTM-4?

Table of Contents

I-VTM4 or Intelligent Variable Torque Management is an all-wheel drive system that dynamically senses the amount of torque needed in each wheel axle and sends the correct amount of power to each of them accordingly. It can even distribute power to either the left or right wheels depending on the traction needed.

What does VTM lock do?

The Variable Torque Management 4WD System (VTM-4) automatically transfers varying amounts of engine torque to the rear wheels under lower traction conditions. If more traction is needed when your MDX is stuck, or is likely to become stuck, you can use the VTM-4 Lock button to increase torque to the rear wheels.

What is Honda ivtm4?

Intelligent Variable Torque Management™ (i-VTM4®) All-Wheel-Drive System. What’s the Benefit? The standard i-VTM4 system is a proactive all-wheel-drive design that enhances confidence in almost any weather condition—and makes handling more enjoyable even on dry pavement.

What is VTM-4 in Honda Ridgeline?

Your vehicle is equipped with a variable torque management 4-wheel-drive system (VTM-4) that distributes engine torque to the appropriate drive axle depending on the available traction conditions. The system is completely automatic, always active, and does not require any driver interaction.

Can I drive with VTM-4 light on?

It’s not recommended that you dive with the VTM-4 LOCK on unless you need it. To turn it off, just pull over, shift into park, and stop the engine. When you restart your car and shift into drive, the light should turn off after a few seconds. VTM-4 is a great safety feature that can help prevent damage to your car.

How do I use VTM-4?

Your shift lever must be on first, second, or reverse gear. Press the “VTM-4 Lock” button between the driver’s instrument panel and the radio. Once the “VMT-4 Lock” button’s indicator light is on, your Pilot will be using all four wheels more aggressively to tackle the terrain.

Can you drive with VTM-4 light on?

Answer provided by

The system turns on and off automatically. If it comes on, it means that your car has lower traction at that particular moment. Normally, the VTM-4 light is nothing to worry about. It just means that your torque management system is working to compensate for adverse road conditions.

Is Honda Pilot AWD all the time?

Honda Pilot isn’t always in AWD as it’s automatic and can detect when to engage the rear wheels. Honda’s Real-Time AWD with Intelligent Control System constantly monitors the road conditions to provide torque to different wheels.

Why does my VTM-4 light keep coming on?

How do I reset my VTM-4?

While the car is running, press and hold the VTM-4 button, typically located on the dashboard next to the radio. Shift the drive selector lever to P and then back to D while stopped. Turn the ignition switch to the lock position, wait a bit, and then restart the engine.

When should I use VTM-4 Honda Pilot?

However, if you encounter a slippery uphill slope, thick snow, mud, or other more severe terrains, then it might be a good idea to engage the VTM-4 Lock. To do this, you will need to follow the instructions below: Your Honda Pilot must be at a full stop or moving no faster than 18 miles per hour (30 km/h).

Can I drive with the VTM-4 light on?

How often should you change VTM-4 fluid?

every 15,000 miles
Replace VTM-4 rear differential fluid
This requires differential fluid changes more frequently than recommended by the Maintenance Minder. If you regularly drive your vehicle under these conditions, have the differential fluid changed at 7,500 miles (12,000 km), then every 15,000 miles (24,000 km).

How do you turn on the AWD on a Honda Pilot?

Press the “VTM-4 Lock” button between the driver’s instrument panel and the radio. Once the “VMT-4 Lock” button’s indicator light is on, your Pilot will be using all four wheels more aggressively to tackle the terrain.

How do you turn off the AWD on a Honda Pilot?

To turn off the VTM-4 on your Honda Pilot, you can use any of the following methods: While the car is running, press and hold the VTM-4 button, typically located on the dashboard next to the radio. Shift the drive selector lever to P and then back to D while stopped.

Can you drive Honda Pilot VTM-4 light?

Answer provided by. The VTM-4 system on a Honda Pilot SE is entirely automatic, always active, and should not require any driver interaction. However, if you notice it comes on unexpectedly, there are ways to disengage the VTM temporarily.

Is the Honda Pilot always in 4wd?

What causes a VTM-4 light to come on?

What happens if you don’t change differential fluid?

If this fluid isn’t changed in the manufacturer-prescribed intervals, then it can get dirty and thick, which could damage the differential over time.

Why does the VTM-4 light come on?

Is Honda Pilot AWD always on?

Is Honda Pilot Always in AWD? Honda Pilot isn’t always in AWD as it’s automatic and can detect when to engage the rear wheels. Honda’s Real-Time AWD with Intelligent Control System constantly monitors the road conditions to provide torque to different wheels.

What causes VTM-4 light to come on?

When should I use VTM-4 on a Honda Pilot?

Is Honda Pilot full time AWD?

What is the VTM-4 light on a Honda Pilot?

It just means that your torque management system is working to compensate for adverse road conditions. If the VTM-4 light is staying on continuously despite normal road conditions, you might have the accidentally hit the VTM-4 LOCK which will keep it on no matter the conditions.