What is the difference between a Sanden 508 and 709?
The 508 is 5 cylinder/8.4cid. The 709 is 7 cylinder/9.36cid.
Is Sanden a good compressor?
Above 1200 RPM, efficiency rapidly increases; at operating speeds of 1800 to 2400 RPM it is about the most efficient pump on the market. It can be operated at continuous crank speeds of 6000 RPM. These characteristics make the Sanden an almost ideal performance compressor.
What kind of oil does a 508 Sanden compressor take?
All Sanden compressors are filled with genuine double end-capped PAG oils (SP-10, SP-15, SP-20, SP-A2). Regarding R134a, for best practice we recommend using the oil that the compressor was supplied with, however, the mixing of genuine SP-10, SP-15, SP-20 and SP-A2 oils should not cause any damage to the AC system.
Where are Sanden compressors made?
Sanden’s compressor manufacturing operations take place at our headquarters in Wylie, Texas (just northeast of Dallas). Clutch components are manufactured at our Sanden Mexican a plant in Saltillo , Mexico. Sanden also has other manufacturing plants around the globe with additional capabilities.
How do I know what kind of Sanden compressor I have?
A: Look at the label on the compressor. The Sanden part number is listed under “Model Number” on the label. The part number is a 4 digit number.
What type of compressor is Sanden?
AC Compressors
Sanden manufactures high quality, durable air conditioning compressors for light vehicles, heavy trucks, agricultural equipment, construction vehicles, buses, and other special applications.
Who makes AC compressors for General Motors?
Sanden is a premier innovator and manufacturer of compressors for mobile HVAC applications. Sanden has been producing automotive compressors for the worlds top vehicle manufacturers for over 30 years.
What does S and D mean on AC compressor?
The compressors have two access couplings: the admission or suction connector for the refrigerant gas, which is always identified with letters S or SUC (suction) and the discharge connector, which is always identified with letters D or DIS (discharge).
Do Sanden compressors come pre oiled?
1. New Sanden compressors are shipped with all the oil required for a normal OEM system for which they were intended. In most cases no additional oil should be added. For R-134a A/C systems the original Sanden PAG oil shipped in the new Sanden compressor is the best lubricant for compressor durability.
What type of AC compressor is best?
Rotary compressors are the preferred option when operating noise is a factor. They are quiet, have a modest footprint, and do not suffer from vibration as much as other compressors. In the unit, a bladed shaft rotates within a graduated cylinder to push and compress refrigerant at the same time.
Who makes Sanden?
Sanden Corporation
| Type | Public KK |
|---|---|
| Founded | July 30, 1943 |
| Headquarters | 20 Kotobuki-cho, Isesaki-shi, Gunma, Japan 372-8502 |
| Area served | Worldwide |
| Key people | Masayoshi Ushikubo, (CEO and Chairman) |
How much oil do you put in a Sanden compressor?
TXV Systems. More than 56 oz. (1600g) Refrigerant Charge:
| Comp. RPM | Oil in Compressor | |
|---|---|---|
| fl.oz | cc | |
| 1,000 | 3.4 | 100 |
| 2,000 | 2.5 | 75 |
| 3,000 | 1.7 | 50 |
Can you get an AC compressor rebuilt?
No, it cannot be rebuilt in the field when servicing a central air conditioning system. Defective motor compressors are replaced in the field with new or reconditioned units. The malfunctioning motor compressor is sent back to the factory to be reconditioned, then sold as a reconditioned unit.
How many Btus does a car AC have?
In general, a 12,000 BTU or 1-ton air conditioner is what most cars use today. That’s if your vehicle’s interior is around the size of a regular apartment bathroom. However, an SUV or other customized bigger cars will require a BTU ranging from 18,000 to 36,000.
What happens if you charge AC on high side?
The damage from trying to charge on the high side would be to you – not the system. More than likely the pressure would back up into the can and explode it like a grenade. If you don’t know what you’re doing, seriously get someone to help out. You ALWAYS want to connect to the low side.
Which AC line is bigger?
The larger line typically carries a cool gas and is insulated. This is commonly referred to as the suction line, but it is also called the return line or vapor line. The smaller uninsulated line typically carries a warm liquid. It is most often called the liquid line.
How much PAG oil do I add to a new compressor?
Here is the amount of PAG oil that different AC components require for their smooth operation:
- Compressor = 1.4 ounces.
- Evaporator = 1.5 ounces.
- Condenser = 1 ounces.
- Accumulator = 1 ounces.
- Hoses = 1 ounces.
How long do AC compressors last?
about 12-15 years
The short answer is that your AC compressor and refrigerant should last about 12-15 years. Learning what crucial components, and how to maintain the compressor, can keep your AC running efficiently for its entire lifespan.
Who makes a good AC compressor?
Best Car AC Compressors
- Denso 471-1630 Compressor.
- NEW AC COMPRESSOR (4711537)
- UAC CO 10736C A/C Compressor.
- Denso 471-8135 New Compressor with Clutch.
- UAC CO 29002C A/C Compressor.
- ACDelco 15-20941 GM Air Conditioning Compressor.
- UAC CO 10905C A/C Compressor.
- Four Seasons 58152 Compressor.
What does Sanden mean?
definite singular of sand.
How do I know if my AC compressor is Sanden?
How long do rebuilt AC compressors last?
A remanufactured compressor has been completely disassembled, all necessary replacements made, cleaned inside and out, and then tested to ensure comparable performance to an all-new unit. This gives you another 8-10 years or more of excellent service at a fraction of the cost of an OEM-affiliated wholesaler.
How long should an AC compressor last?
How powerful is a car AC?
In a modern automobile, the A/C system will use around 4 horsepower (3 kW) of the engine’s power, thus increasing fuel consumption of the vehicle.
How many BTU is a pickup truck AC?
Most automobile AC units provide 10-20,000 BTUs of cooling, and most over the road trucks are 20-40,000.