What is phenolic C?

Phenolic C (NEMA C) consists of a cotton canvas fabric and general-purpose phenolic resin. The product is easy to machine and operates with less noise than metal. In addition, this material is not as abrasive as fiberglass alternatives when used in wear applications.

Is Garolite the same as phenolic?

Thin sheets of resin impregnated materials are laid upon each other; then under high heat and pressure, cure to form a solid mass. Base materials are normally paper, cloth or glass fabric. Resins normally used include phenolic, polyester, silicone, melamine and epoxy systems.

How strong is phenolic plastic?


ASTM or UL test Property General purpose
D651 Tensile strength (psi) 6,500- 7,000
D790 Flexural modulus (105 psi) 11-13
D790 Flexural strength (psi) 9,000- 11,000
D256 Impact strength, izod (ft-lb/in. of notch) 0.30- 0.35

How thick is phenolic?

010″ – 4.00″ thick.

What is material C?

Carbon steel is a steel with carbon content from about 0.05 up to 2.1 percent by weight.

What is phenolic material used for?

Phenolic sheet is used in parts fabrication. These parts may be used in everything from electrical circuits and applications to bullet and storm protection equipment.

What is G-10 phenolic?

Phenolic G-10/FR4 is a continuous woven glass fabric laminated with an epoxy resin. This grade is extremely high in mechanical strength, has low water absorption and dissipation factors and has superior electrical characteristics, which are exhibited over a wide range of temperatures and humidities.

Is G-10 the same as Garolite?

Garolite is a composite material and brand name for G10 – FR4, which is developed by curing epoxy and fiberglass under high pressure to create a thermoset glass-epoxy laminate material. It is very stable over temperature, absorbs a low amount of moisture and possesses a good strength to weight ratio.

What are the different types of phenolic?

Types of Phenolic

  • Phenolics Glass Reinforced. Woven glass with resin (epoxy, melamine, polyimide, or silicone) variations are dependent upon the intended end-use application.
  • Phenolics Paper Reinforced.
  • Phenolics Cotton Canvas Reinforced.
  • Phenolics Cotton Linen Reinforced.
  • Phenolics Nylon Reinforced.

What is phenolic plastic used for?

Phenolic resins are good for high-temperature applications where parts must meet fire safety standards. Phenolic resins are used in a wide range of applications, including electronics, ballistics, mine ventilation, offshore water pipe systems, aerospace, rail and mass transit.

What type of material is phenolic?

Phenolics are the result of polymerization between layers of paper, canvas, linen, or glass cloth impregnated with synthetic thermosetting resins. This laminated material is a popular alternative to acrylic because of its high resistance to flexing.

What is c10 material?

Weldability: It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions.

What is c20 steel?

C-20 is an unalloyed low carbon mild steel grade supplied as a hot rolled or bright drawn finish bar. As a low carbon steel grade it provides low strength with good machinability and is suitable for welding. Mild Steel, fairly easy to machine but with a tendency to ‘rip’ if unlubricated.

What is the difference between G10 and FR4?

The main difference between NEMA Grades G10 and FR4 is that FR4 is a fire retardant grade of G10. Therefore, FR4 may be substituted where G10 is called out except in applications where halogens are not desired. G10 can never be substituted where FR4 is called for.

Is Micarta or G10 better?

Is G10 Better Than Micarta? Since G10 is made of glass fibers while micarta is constructed with linen, paper, and/or canvas, it tends to have higher strength and durability, even though both are among the best knife handle materials available.

Is Micarta or G-10 better?

What are phenolic groups?

In organic chemistry, phenols, sometimes called phenolics, are a class of chemical compounds consisting of one or more hydroxyl groups (—OH) bonded directly to an aromatic hydrocarbon group. The simplest is phenol, C. 6H. 5. OH.

Is phenolic waterproof?

The coating of the wood is phenolic resin and it is this coating that makes it waterproof.

What is C15 material?

C15 is a plain carbon steel with a nominal 0.15% carbon content. It is a relatively low strength steel but it may be quenched and tempered for increased streng. Chemical Composition: Element.

What is mild steel c10?

Hot Rolled Mild Steel Bars are used for general purpose applications. This steel is a low carbon grade, having good over-all mechanical properties. It is easy to fabricate by the usual structural methods, such as mild cold and hot forming and welding.

Is for c20 material?

What does FR4 stand for?

FR means “Flame Retardant” and 4 means fiber glass epoxy. This term is used to describe the most popular material to manufacture circuit boards.

What is G11 material?

The G11 is a high strength, medium weave glass epoxy laminate that retains a minimum of 50% of its flexural strength at 302°F while preserving its properties. It provides excellent physical, mechanical and electrical properties at both room and elevated temperatures.

Why is Micarta more expensive than G-10?

G-10 is a little easier to get texture into and can actually have its fiberglass woven into a texture. While micarta is virtually texture-less at first, a texture can be carved into the handle. This takes more manual labor than creating texture on G-10 and so micarta is costlier.

Does G-10 melt?

Built from durable fiberglass and epoxy resin, and formed under high temperature and pressure, G-10 is unlike other polymers — it will not melt. G-10 is also resistant to temperature and is extremely lightweight.