What is a Longwell power cord used for?

Table of Contents

Longwell cables and connectors are used by leading electronics manufacturers throughout the world. Companies like Apple, DELL, HP, Lenovo, LG and Samsung have come to rely on Longwell as a global supplier for all their cable and connectivity needs.

What is a right angled plug?

What is a Right Angle (L) cord plug? A Right Angle (L) cord plug is essentially a cord that connects to the plug at a 90-degree angle.

What is a C7 power cord?

C7 is the two-pronged non-polarized connector. They have 2 prongs side-by-side. C7 Power cords are typically used to power low voltage appliances such as portable CD players, laptop power supplies, video/audio equipment, etc.

What is a C13 power cord?

These high quality 3-pin IEC mains power cords are suitable for many types of desktop computers / electrical appliances and are sometimes colloquially referred to as “Kettle leads”.

What is a 90 degree plug?

A right angle cord is a cord with a plug that connects the cord at a 90-degree angle from the plug. This type of cord connector takes up a narrower space than standard plugs and guides the cord to run along the wall or device.

What type of power plug is used in Australia?

For Australia the associated plug type is I, which is the plug that has three flat pins in a triangular pattern. Australia operates on a 230V supply voltage and 50Hz.

Are all C7 power cables the same?

There are two different versions of C7/C8, non-polarized and polarized. On the non-polarized version, both sides of the connector will be round. On the polarized version, one side will be flat instead of round. Make sure to check which version you need to ensure the power cable will fit your device.

What’s the difference between C13 and C14?

The IEC C13 connector is typically used on standard mains cables; the C14 connector is used on devices, power supplies and IEC extension cables.

Can I use C15 instead of C13?

These connectors work on the temperature rating of 120°C. IEC-C13 connectors are rated at 15A/250V locally and at 10A/250V internationally with the temperature rating of 65°C. So when you need a power cord device having high temperature, you can use C15 instead of C13.

Can I plug a 10amp to 15amp Australia?

The 10A Earth pin is 6.4mm wide, while the 15A Earth pin is 9mm wide. By virtue of the fact that it is physically possible to insert a 10A plug into a 15A socket, there is no problem with with using a 10A plug in a 15A socket.

Are Chinese and Australian plugs the same?

However, there are anomalies when pairing one country’s plug to another’s socket: though the Chinese line and neutral pins are 1 mm longer than its Australian counterpart (18 to 17 mms respectively), the Australian plug will fit the Chinese socket.

How do I know what power cord to use?

The right AC adapter for your device is one with matching electrical ratings. The device’s input voltage and current must match the adapter’s output voltage and current. Check the device’s product label or user manual to see its rated voltage and current.

What is the difference between C14 and C13?

Can you plug a C15 into a C14?

The IEC-C15 connectors also work in the C14 outlets. But the IEC-C13 connectors do not fit in the C16 inlets.

Will C15 fit in C14?

However the C15 has a notch at the base. The C15 can be plugged into the C14 or C16 inlets while the C13 is limited to the C14 inlet. For this type of NEMA receptacle 14 gauge cord yields the max amperage for this cord up to 50 feet. Male plug inserts into a IEC60320 outlet rated for 250 volts and 15 amps.

How can you tell if a socket is 15 amp?

How to check if you have 15amp or 20amp circuit in home – YouTube

Why are caravans 15 amps?

If all of that current was running through a single 10A circuit, it’s a fair bet the RCD would constantly trip to prevent an overload and potential fire. Ultimately, a 15A circuit gives a caravanner more scope to safely run the many appliances found in a typical RV.

Can I plug A 10amp to 15amp Australia?

Why do some plugs have 2 prongs Australia?

There are unearthed versions of the plug used with this outlet that have the two flat inverted V-aligned pins, without the Earthing pin. To sum it up, these plugs are only to be used for devices where other safety standards are in use (e.g. double insulation).

Will too much amperage hurt a device?

If an incorrect voltage is used — say a higher voltage than the device is rated to accept — then yes, too many amps may be drawn and the device can be damaged. This is why it’s critical to use the correct voltage.

What are the types of power cords?

Below is a short glossary of some of the different codes you will find:

S – Service Grade. This means the cord is 600-volt rated.
SJ – Junior Service. Meaning 300-Volt rated.
T – Thermoplastic. The wire is coated in PVC.
P – Parallel.
O – Oil-Resistant.
W – Weather-Resistant.
V – Vacuum Type.

Are C13 and C15 the same?

The C15 cord has a temperature rating up to 120 degrees Celsius while the C13 cord only has a temperature rating up to 65 degrees Celsius. That means any high-temperature devices you want to power, even something as simple as an electric kettle, require a C15 cord.

Are C15 and C13 interchangeable?

What happens if you put a 20 amp outlet on a 15 amp circuit?

As I understand it, the reason that a 20 amp outlet can’t be connected to a 15 amp circuit is that someone could potentially connect a 20 amp device, overload the circuit, and cause a fire.

Do I need a 20 amp or 15 amp outlet?

Standard 15-amp receptacles are suitable for typical household appliances, lamps and other accessories. A 20-amp receptacle is for heavy-duty appliances and power tools, such as air compressors. Residential garages occasionally have 20-amp receptacles to accommodate larger power tools.