What does OSHA require for lock out/tag out?

Lockout/Tagout devices must be protective, substantial, and authorized for the machinery. All-new, refurbished, or overhauled equipment must be capable of being locked out. Lockout/tagout devices must identify each user and only the employee who initiated the lockout can remove it.

Do you have to use a tag with lockout?

Question 2: What is an acceptable manner for the maintenance group to affix their tags to the lockout devices as part of their verification of the lockout? Reply: The standard does not require that tags be used to verify isolation or de-energization of machinery or equipment.

What are the 6 steps of lock out/tag out?

Steps for conducting a lockout tagout

  1. Preparation. The first step to completing a proper lockout tagout is preparing the equipment to be powered off.
  2. Shut Down.
  3. Isolation.
  4. LO/TO Application.
  5. Check for Stored Energy.
  6. Isolation Verification.

What must lockout tags have on them?

Both locks and tags must clearly indicate the identity of the employee who applied the device. This provides positive identification as to who is servicing the machinery and equipment. The identification will also indicate who may not have finished working in a multiple lockout/tagout situation.

What is the difference between lock out and tag out?

Lockout means to place a lock on a device that prevents energy release. Tagout means to place a tag on a switch or other shut off device that warns not to start that piece of equipment.

What are the 10 steps for lock out/tag out?

10 key steps for lockout/tagout procedures

  1. Identify the procedure to use.
  2. Prepare for the shutdown.
  3. Notify all affected employees.
  4. Shut down the equipment.
  5. Isolate the equipment.
  6. Add the individual locks.
  7. Check stored energy.
  8. Verify the isolation of the machine or equipment.

What three words must be on a lockout tag?

OSHA requires three basic elements in a lock-out tag-out program.

Think, plan and check.

  • If you are in charge, think through the entire procedure.
  • Identify all parts of any systems that need to be shut down.
  • Determine what switches, equipment and people will be involved.
  • Carefully plan how restarting will take place.

Where should lockout/tagout tags be placed?

Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. Lockout devices, where used, shall be affixed in a manner to that will hold the energy isolating devices in a “safe” or “off” position.

What 3 words must be on a lockout tagout?

Who is responsible for lock out/tag out?

Under the standard’s group lockout/tagout requirements, a single authorized employee must assume the overall responsibility for the control of hazardous energy for all members of the group while the servicing or maintenance work is in progress.

When should safety lockout tagging be used?

In a nutshell, Lockout Tagout is used for energy isolation, which means zero energy. Testing of the isolation point of all forms of energy to ensure complete isolation, i.e. zero energy, needs to be verified before operating on the machine or device.