What are VOG panels?

Vinyl on gypsum (VOG) panels has a laminated-like coating that holds the gypsum together. It’s used in mobile homes because it repels water, is affordable, and is super easy to install. This coating, however, makes painting vinyl walls in mobile homes difficult.

How thick are VOG panels?

VOG is commonly associated with mobile homes, as our homes and styles change so do our choices of wall patterns and colors. Depending on the home you select, the walls can be 3/8” or ½” thick. Each factory has a variety of vinyl colors and design options to choose from.

Can you paint over VOG panels?

The vinyl surface of VOG panels will accept paint better if you first coat them with a good quality acrylic primer. Applying primer is done like any painting job. Start by using an angled trim brush to cut in the primer along the edges of the wall, then apply the primer to the broad areas using a roller.

How do you repair VOG panels?

Apply the panel adhesive on the exposed wood. And place the new panel on top amer in the finishing nails to secure the panel. Step 4 add the finishing touches replace.

Is paneling cheaper than drywall?

Because of the greater attention needed for cutting and trimming wood, paneling may take more time and cost more than installing drywall.

Can I put drywall in a mobile home?

Mobile homes are designed to be light, but the walls still have wooden studs and manufacturers will often use 1/4-inch paneling to cover the framing. The wall studs are spaced to support 4-by-8 panels, so the mobile home drywall, which comes in 8ft by 4ft sheets, should be no problem to install.

Can you hang things on mobile home walls?

Hanging pictures in a mobile home requires more than just tapping in a picture hanger. Mobile home walls come in at only 1/4- to 3/8-inch thick; older mobile homes feature vinyl-coated walls and newer homes are outfitted with 3/8-inch drywall. In contrast, stick-built homes have a minimum of 1/2-inch drywall.

How do I make my mobile walls look like drywall?

Walls

  1. Remove all trim from the walls.
  2. Prime the walls with an oil based primer.
  3. Fill in the line gaps in the paneling with drywall mud.
  4. Tape and mud the joints between the 4 x 8 sheet of paneling.
  5. Spray orange peel texture on the walls.
  6. Prime the walls for paint with a latex primer.
  7. Paint the walls.

How much weight can a mobile home wall hold?

Depending on the type of hook you’re using, you’ll be able to hold between 30 to 50 pounds. This article goes into more depth about drywall hooks and how you can use them.

How do you get rid of seams in mobile home walls?

Mobile home manufacturers cover walls with panels of vinyl board and fasten them in place with battens. Contractors refer to the battens that cover seams as “batts.” Remove batts to expose the raw seams, then use a plaster product or joint compound with drywall tape to eliminate the seams in mobile home walls.

How can I cover my wall cheaply?

Cheap Ways To Cover Walls

  1. Curtains.
  2. Peel And Stick Wallpaper.
  3. Print Fabric.
  4. Wall Panels.
  5. Wallpaper Panels.
  6. Mirrors.
  7. Foam Boards.
  8. Art Prints & Photography.

What is the cheapest interior wall material?

Plywood. If you’re looking for cheap panels for walls, plywood is inexpensive, easy to install, and durable.

Is drywall too heavy for a mobile home?

Drywall that is 5/8″ thick is, of course, a little heavier, at 2.31 pounds per square foot or 73.92 pounds per sheet which is entirely too much for mobile home ceilings.

How thick are the walls in a mobile home?

Manufactured home wallboards range in thickness from 5/16” to ½”. The 5/16” thickness used to be the most popular measurement for Paper On Gypsum (POG) wallboards, but the majority of new Clayton homes with POG wallboards are now 3/8”.

How much weight can a mobile home wall support?

In most cases, this should be able to hold between 50 to 100 pounds.

Can you hang pictures on VOG walls?

If your mobile home is older, it might have wood or artificial wood wall panels. In that case, you’re probably looking for ways to brighten up your walls a little. Hanging pictures is a great way to change things up! Vinyl-on-gypsum (VOG) or paper-on-gypsum (POG) are two more possibilities for older mobile homes.

Do manufactured homes lose value?

Myth: Manufactured homes do not appreciate in value like other forms of housing. Instead, manufactured homes depreciate in market value, similar to the way automobiles lose value each day.

What are the strips on mobile home walls?

Many manufactured homes are built with wall sections or panels that make building the home more efficient because assembling and transporting it is easier. To cover the seams between these pre-finished, vinyl-covered wall panels, Clayton uses batten strips.

Can I hang a TV on the wall in a mobile home?

Mounting a TV in a mobile home requires knowledge of the home’s wall material, and the width and type of studs within the walls. Most wall materials alone will not support a TV’s weight. Drilling in the center of studs and using the mount manufacturer’s recommended hardware should offer the best hold.

How do you hang things on VOG walls?

  1. Attach stick-on hooks to the wall for lightweight items such as small pictures. Pull the paper cover off the back of the hook.
  2. Use thin-wall anchors.
  3. Put small pieces of strong wall putty to the back of the item and press it on the wall.
  4. Use interlocking adhesive strips that are designed to hold objects on walls.

Can you put drywall over paneling in a mobile home?

What is the least expensive wall paneling?

If you’re looking for cheap panels for walls, plywood is inexpensive, easy to install, and durable. The wood grain will warm up a space and can be stained or painted to coordinate with any decor. Plywood can be installed in sheets or planks, the latter resembling the look of shiplap or traditional wood paneling.

What are 3 types of wall coverings?

Contract Commercial Wallcoverings

  • Type I: Light duty for areas with light to moderate traffic.
  • Type II: Medium/heavy duty for use in high traffic areas and public areas.
  • Type III: For heavy traffic areas that require more wall protection.

What can I put on my walls instead of drywall?

Drywall Alternatives

  • Wood Planks. Wood planks are an age-old drywall alternative that has certainly stood the test of time well.
  • Veneer Plaster.
  • Lath & Plaster.
  • Plywood and Sheet Wood.
  • Texture Wall Panels.
  • Brick & Masonry.
  • Exposed Concrete Block.
  • Cement Board.

How can I cover a large wall cheaply?

10 Affordable Ways To Fill A Large Blank Wall

  1. DIY a triptych. Large, affordable artwork can be difficult to find.
  2. Turn to textiles.
  3. Curate a gallery wall.
  4. Consider wallpaper.
  5. Shelve your art.
  6. Go bold, go mural.
  7. Get stuck on washi tape.
  8. Tackle just one (and you’re done!)