What are the sizes of finishing nails?

Table of Contents

Finishing nails typically range from 16 to 10-gauges and are much more robust than brad nails. Finishing nails also come in a wider variety of lengths than most brad nails do; some can be upwards of 3” in length.

What is the shortest finishing nail?

Used for general repairs, trim/molding and picture framing, the 23-gauge Arrow Pin Nails are the thinnest and shortest (3/8” and 1/2″) of all finishing nails.

What size nails do you use for finish trim?

Finish (Trim) Nailer: Primarily for shooting 16-gauge or 15-gauge nails. They use a finish nailhead, easily identified by being stored at an angle on the nailer. This angle also allows for easy access in tight spots.

What is the difference between 16 gauge and 18 gauge finish nails?

Gauge is actually the number of nails that are lined up. This indicates that 16-gauge nails are thicker and can hold better when compared to 18-gauge brads. You will have to keep in mind that a low gauge number will have a thicker nail.

What is the difference between a brad nail and a finishing nail?

Brads are excellent for trim work, including narrow trim around windows or doors, shoe moulding and quarter-round moulding. Finish nails are versatile nails with a 15- or 16-gauge diameter. They’re designed for thicker cuts of wood. They’re available in collated finishing nail strips for nail guns or individual pieces.

Can you hammer in finishing nails?

Avoid scratches or hammer dents by using a nail set to finish driving the nail. Use a nail set that is the same diameter as the finishing nail. Center it on top of the nail and hit it with the hammer. Continue hammering until the nail is about 1/8-inch below the surface of the wood.

What’s the difference between a brad nail and a finish nail?

How long should finish nails be for trim?

What size nails for baseboard trim- Recap. Just to summarize the whole post, the minimum finish nails size you can use to secure baseboard trim (and other similar trim pieces) is 2″. But we suggest that you work with 2.5” (8d), 15 to 18 gauge finish nails for the best results.

Can I use 18 gauge nails for trim?

18-gauge brad nailer

It’s perfect for standard trim, furniture making and odd jobs around the shop.

When would you use a 16 gauge finish nailer?

The 16-Gauge Nailer is Versatile
Carpenters use them for a wide variety of tasks including interior trim, baseboard, and crown. You can do stair risers with them, and they’re a good option to nail down tongue and groove flooring like near a wall or in a closet where a flooring nailer won’t work.

Can a 16 gauge finish nailer use 18 gauge nails?

what HAPPENS when you put the WRONG nails in your air nailer

Should I use brad nails or finish nails for baseboards?

While the downside to a brad is its holding power, finish nails are made from heavier 15- or 16-gauge wire, which means they can handle a greater payload. For larger trim, such as baseboards or crown molding, a finish nail is the more suitable choice.

How do you hide finishing nails?

Spread a little spackle over the nail head.
Countersink your nails by using a nail set and a hammer to drive them just a little below the surface of whatever you’re going to paint. Then, spread spackle over the nail head to hide it. If you’d like, use a putty knife to smooth out the surface of the spackle.

Can I use finish nails in a brad nailer?

Brad Nailer Vs Finish Nailer | What’s The Difference? – YouTube

Can I use 18-gauge nails for trim?

What nails should I use for trim?

Should I use a brad nailer or finish nailer for baseboards?

What are 15 gauge finish nails used for?

15-gauge – For the outer nail on casing (through drywall) and for base trim or other large trim , and sturdy install of door jambs, particularly heavy, solid-core doors. Non-structural interior applications such as crown molding, door casings or chair rail offer the most choice in the tools and fasteners you use.

Do I need a 15 or 16 gauge nailer?

15 Gauge vs 16 Gauge | Rule Of Thumb
If you’re working with thick, dense wood, or hanging doors you need a heavier 15 gauge nail. The 15 gauge finish nailer is ideal for heavier jobs. If you’re working with thin wood, delicate molding or want a smaller nail head to fill, then the 16 gauge nailer is the better option.

What is better a brad nailer or finish nailer?

In general, go with finish nails for thick wood and brads for thin wood. Finish nails are stronger than brads, so choose them if your project needs to be durable. Brads are thin, 18-gauge nails made for more delicate woodworking jobs. They’re available in collated strips for nail guns or individual pieces.

What’s the difference between Brad nailer and finish nails?

What’s the Difference Between a Brad Nailer vs Finish Nailer? The main difference between these two different nail guns is the size of the nail they shoot. The lower the gauge number, the thicker the nail. The brad nailer fires 18 gauge nails, and the finish nailer fires 16 gauge nails.

Are Brad nails the same as finishing nails?

Finish nails are stronger than brads, so choose them if your project needs to be durable. Brads are thin, 18-gauge nails made for more delicate woodworking jobs. They’re available in collated strips for nail guns or individual pieces. Brad nail length ranges from 1/2-inch to 2 1/2-inch.

Should I fill nail holes before painting?

Painting a wall will NOT cover nail holes, you need to repair nail holes (and even pin holes) before you paint. With the right tools, this job is easy, and your finished paint job will look much more professional.

How can you tell the difference between a brad nailer and a finish nailer?

How long should nails be for baseboards?

As a general rule, baseboard nails shouldn’t be any longer than 2 inches. The ideal length is between 1.5 inches and 2 inches.