Is Marshall JTM a plexi?
Marshall JTM45 2245 30-watt Plexi Tube Head | Sweetwater.
Who used Marshall JTM 45?
The JTM 45 became the basis for many subsequent Marshalls, most notably the Marshall 1962 combo (later referred to as the “Bluesbreaker” due to its use by Eric Clapton with John Mayall’s Bluesbreakers).
What amp did Peter Green use with John Mayall?
1964 Marshall JTM45 4×10
That’s the case with this month’s featured amp: a 1964 Marshall JTM45 4×10 combo that was owned and played by Peter Green during his years with Fleetwood Mac, and potentially with John Mayall’s Bluesbreakers.
What is the best Marshall amp ever?
JCM800 2203 100W Valve Head
The legend itself, the Marshall JCM800 head is the amplifier that really defined that notorious Marshall “crunch” sound. The 100W 2203 model is still in production decades after its introduction, and has been heard on countless records from the 80s to present.
What does JTM stand for Marshall?
Jim and Terry Marshall
Marshall started building amps in 1962. Their first model was called JTM45, a copy of (or inspired by) the Fender Bassman. JTM stands for Jim and Terry Marshall, Terry being Jim’s son) At some point, Marshall started to offer 3 versions of the JTM45 – Lead, Bass and PA.
What amps did Jimmy Page use?
He was also well known for his use of a double necked Gibson EDS-1275. When performing live Page primarily used Marshall JMP Super Lead amplifiers.
What amp was the JTM45 based on?
Fender Bassman
So what happened? The original amp was based on the Fender Bassman, the favourite amp of Terry Marshall at the time. Like the Bassman early versions of the JTM used 6L6 or US 5881 valves in the output stage, later models were upgraded to the KT66, EL34, or KT88 valves.
What amp did Marc Bolan use?
Marc used various amps including Orange , Marshall, Vox and also the following: HH Electronic IC 100-S Guitar Amp Head. Vox AC30 Guitar Combo Amp. HH Electronics IC100 Amplifier.
What gauge strings did Peter Green use?
There is speculation that Green used quite heavy gauge strings – possibly as heavy as . 012. There is also some speculation that he raised his pickup height much higher than other players, which allowed him to play thinner strings, but make them sound like they were heavier.
What amp did Jimi Hendrix use?
Marshall amplifiers
Jimi Hendrix’s Amps
Jimi Hendrix was one of the earliest users of Marshall amplifiers, and for most of his career he powered his sound with three 100-watt Super Lead valve amp heads.
What Marshall amp did Stevie Ray Vaughan use?
Marshall 4140 Club & Country
Early in his career, Vaughan used a Marshall 4140 Club & Country with JBL speakers for his clean tone, and two 1964 Fender Vibroverbs for distortion when performing.
Why is a Marshall called a plexi?
The name originates from its shiny, Plexiglas panel, commonly used on Marshall amps between 1965-1969. Although many amps are referred to as ‘Plexi’s’ The 100 Watt Super Lead (model number 1959) is most commonly associated with the name.
What guitarists use Marshall amps?
Since then, an enormous array of bands and artists have used Marshall amps for both sudio and live use. Some of these include Jimi Hendrix, Jimmy Page, Slash, Eric Clapton, Graham Coxon, Zakk Wylde, Angus Young, Joe Perry, Simon Neil, Joe Trohman, Noel Gallagher, Lzzy Hale, Sid Glover, Joe Bonamassa, Jeff Beck….
What amps did Jimi Hendrix use?
Jimi Hendrix’s Amps
What amps did Peter Green use?
At various points he played a Dual Showman Reverb, a Twin Reverb and a Deluxe Reverb. These are the amps that Green used during some of Fleetwood Mac’s best live performances, including The Boston Tea Party in 1970.
What tubes were in original JTM45?
JTM45, 45W head
The circuit was a 1959 Fender Tweed Bassman (circuit 5F6-A) clone. It is said that the first prototype and early production amps were fitted with two 5881 beam power tetrodes, three ECC83/12AX7 tubes and a GZ34 rectifier tube, but soon KT66 tubes were used instead of the 5881 tubes.
What amps did T-Rex use?
In 2004, T-Rex introduced the BigTone series of guitar amplifiers. Handmade, like all their products, these amplifiers incorporated EL84 EH power tubes. The BigTone series consisted of 4 products: a 45 watt head, a 30 watt combo with 2×12 inch Alnico speakers, a 2×12 cabinet, and a 4×12 cabinet.
What gauge strings did Santana use?
Carlos Santana’s Guitar Strings:
016, . 025, . 033, . 043) – These strings were designed by Rene Martinez who served as Carlos’ guitar tech at some point, but started his career as a tech with Stevie Ray Vaughan in 1985.
What gauge strings did Les Paul use?
Question: What Strings do Les Paul Guitars Come With? Answer: Gibson Les Paul guitars ship with a standard set of . 009-. 046 gauge strings.
What pedals did Peter Green use?
Boost & overdrive pedals
Peter Green didn’t use any guitar pedals during either The Bluesbreakers or Fleetwood Mac. Like so many guitarists from the 1960s and 1970s, his tone came from pushing his amp to the point of breaking up and overdriving. Green drove his amps hard and that really helped create his tone.
What amp did Eric Clapton use?
It is with Fender amps however that Eric Clapton is best associated. And again, over the last five decades, Clapton has played a wide variety of different Fender amps. However the two that have arguably had the greatest impact on his tone are the Fender ’57 Custom Twin and the Fender ’57 Custom Champ.
What amp did Stevie Ray use?
The amplifiers he used on stage included: Two “Blackface” Fender Super Reverbs. Marshall Club & Country combo amp with 2×12″ JBL speakers. Two 1964 “Blackface” Fender Vibroverb amplifiers (numbers five and six off production line), each with one 15″ speaker.
What amplifier does Eric Clapton use?
Amped Up Amps
Clapton tours with two Fender ’57 Bandmaster custom series amps, but these have a twist. They were built by Alexander Dumble specifically for him.
Which Marshall amp did Jimi Hendrix use?
On Tour. The Marshall Super 100 amps were used on tour by Hendrix from the time he acquired them, in October 1966, to around early 1968, when he was offered to play on Sunn amps as a part of an endorsement deal.
Why do Marshall amps sound so good?
It’s easy to see why Marshall amps sound so good. They have an aggressive, biting tone that can cut through the mix, making them ideal for playing in loud rock bands. The second thing that makes Marshall amps sound good is their unique design.