How do I identify my Baldor motor?

12 Serial number (SN)

A unique identifier assigned incrementally or sequentially to a motor to identify it specifically. For Baldor-Reliance NEMA motors, the serial number formula is a location-year-month-day-motor code.

Are Baldor motors good?

Best Uses for Baldor
Baldor motors are best known for their energy efficiency. Their line of Super-E® motors meets and exceeds the NEMA Premium® efficiency standards. The standard industrial motor sits around 88% efficiency, while the Baldor•Reliance® Super-E® motors are upwards of 94.5% efficient.

How much does a 30 HP Baldor motor weight?

433 437
Compare with Similar Items

This Item: Baldor-Reliance Motor EM4104T, 30HP, 1770RPM, 3PH, 60HZ, 286T, 1060M, TEFC, F1 Baldor-Reliance Motor CEM4104T, 30HP, 1770RPM, 3PH, 60HZ, 286TC, 1060M, TEFC, F
Weight 433 437
Dimension C 27.76 in 27.76 in
Power Factor 80 80
Bearing Opp Drive End 6309 6309

How much does a 10 HP Baldor motor weight?

18.87 Pounds
Enhance your purchase

Brand Baldor Electric
Speed 1180 RPM
Voltage 230 Volts
Item Weight 18.87 Pounds

How do you read a motor nameplate?

The RPM listed on the nameplate is the shaft speed for the motor. The speed of the motor is directly related to the frequency of the line voltage and the number of poles in the motor. At 60 Hz, a 4 pole motor will rotate at approximately 1800 RPM (7200/4 poles).

What does a motor nameplate tell you?

The nameplate contains information about the construction characteristics and performance of the motor. The types of information that are shown include the number of phases, rated operating voltage, service duty, efficiency code, frame size, IP rating, insulation class and more.

Where are Baldor motors made?

Baldor Electric was founded in 1920 by Edwin Ballman and Emil Doerr. The name of the company was derived using part of each of their names. In 1967 the Company’s headquarters were moved from St. Louis, Missouri to Fort Smith, Arkansas.

Does ABB own Baldor?

Zurich, Switzerland, January 27, 2011 – ABB Ltd (NYSE: ABB), the leading power and automation technology group today announced that it has completed its acquisition of Baldor Electric Company (NYSE: BEZ), a North American leader in industrial motors.

What do the numbers mean on a motor?

The configuration number tells you how many electromagnets there are on the stator, and the number of permanent magnets there are on the rotor. The number before the letter N shows the number of electromagnets there are in the stator. The number before the P shows how many permanent magnets there are in the rotor.

How do I check my motor specs?

Electrical input //

  1. Voltage on motor nameplate.
  2. Frequency on motor nameplate.
  3. Phase on nameplate.
  4. Current on nameplate.
  5. Motor type designation.
  6. Power factor also known as cosFI.
  7. Motor efficiency label; Full-load speed; Efficiency in percent and kW or horsepower.
  8. Motor duty.

How do I find my motor code?

Find it in the lower corner of your windshield on the driver’s side. Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes.

Are all Baldor motors made in USA?

Baldor has 14 manufacturing locations in the USA and one plant in Bristol, England.

What is Baldor called now?

Baldor Electric Company is now ABB.

How do I read my electric motor specs?

The higher the letter in the alphabet , the higher the safe operating temperature, and the longer the winding will last at any given operating temperature. Reducing slip rpm increases motor efficiency, so more efficient designs usually have higher full-load speeds.

What is full load amps on a motor?

Full Load Amps, or F.L.A., represents the amount of current the motor is designed to draw at the rated horsepower. In the example nameplate, this means that when the motor is running under a full load at 230 volts, we can expect it to draw 5.4 amps.

What is the motor specification?

It is an indication of how much of the input electrical energy is converted to output mechanical energy. The nominal efficiency of the motor in Fig. 1 is 93.6%. The higher the percentage, the more efficiently the motor converts the incoming electrical power to mechanical horsepower.

How do you read engine numbers?

Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes. Just tell the store clerk those two characters and you’re in business.

What engine do I have?

So how do you know the exact specification of your engine? All the information you need about your engine is included in the serial number on your engine plate, which you can use to find the parts to fit on your engine.

Are ABB and Baldor the same?

Baldor Electric Company is now ABB.

Is Baldor motors still in business?

markets, designs, manufactures, and provides service for industrial electric motors, generators and mechanical power transmission products. This business was formerly known as Baldor Electric Company until its company name was merged into ABB on March 1, 2018.

What do motor frame numbers mean?

The frame number relates to the “D” dimension (distance from center of shaft to center bottom of mount). For example, in the two-digit 56 frame, the “D” dimension is 3½”, 56 divided by 16 = 3½”.

What does RLA mean on a motor?

RLA: Running-Load-Amps: Same as FLA. LRA: Lock-Rotor-Amps: A motor draws a surge of amperage when it starts to get the rotor rotating and to achieve the rated horsepower. This amperage draw is approximately 6 x FLA of the rated motor for six to eight seconds.

How many amps does a 3 phase motor use?

At 230 volts, a 3-phase motor draws 2.5 amps per horsepower. At 230 volts, a single-phase motor draws 5 amps per horsepower. At 115 volts, a single phase motor draws 10 amps per horsepower.

How do you read the specs on an electric motor?

  1. Frame Designation (FR) – this is typically a two or three digit number followed by one or more letters that identifies important mounting dimensions.
  2. Manufacturers Type (TYPE).
  3. Horsepower Output (kW).
  4. Time Rating or duty (DUTY).
  5. Max Ambient Temp.
  6. Insulation System Designation.
  7. Speed At Rated Load (RPM).
  8. Frequency (HZ).

What does P1 mean on electric motor?

P1 is the total induced power to the pump system. P2 is the power coming from the motor (shaft effect). P2 is the nominal power of the motor.

Baldor Electric will now be known as ABB. ABB will continue to manufacture, design and market Baldor-Reliance motors and Dodge mechanical power transmission products at 15 manufacturing locations in the US.

Who manufactures Baldor?

ABB Motors and Mechanical Inc.
ABB Motors and Mechanical Inc. The US business unit, headquartered in Fort Smith, Arkansas, oversees 15 manufacturing locations in 8 states. The company sells Baldor-Reliance and ABB branded industrial electric motors.

Is Baldor Made in USA?

Customer and employee education continues to be an important focus at Baldor. Baldor has 14 manufacturing locations in the USA and one plant in Bristol, England.

The first two numbers represent the shaft height from the mounting base. This number divided by four represents the shaft height in inches. The third number is the bolt mounting hole dimensions, some motors may have multiple holes for different mounting options.

What do NEMA codes mean?

NEMA designations are based on a two-part code where the numbers before the dash represent voltage and wires and the numbers after the dash represent amperage. For example, the “5” in the common NEMA 5 15 represents 3-Wire 125V and the “15” represents 15 amp.

Where are US Motors made?

State-of-the-Art Manufacturing Facility
Since 1966, quality U.S. MOTORS® brand stock and custom electric motors have been manufactured by skilled, dedicated employees in the 347,000 square-foot Mena, Arkansas facility.

Which is faster Star or Delta?

The speeds of Star connected motors are slower as they receive 1/√3 voltage. The speeds of Delta connected motors are high because each phase gets the total of line voltage.

Who owns Baldor Electric Company?

ABB LtdABB Motors and Mechanical / Parent organization

When did Nidec buy U.S. MOTORS?

2010: Nidec Corporation acquires the motors and controls business of Emerson Electric Company – including the U.S. MOTORS brand – forming Nidec Motor Corporation.

Where are Nidec motors made?

What happens if you connect a Delta motor in Star?

when you connect the delta connection motor into a star connection mode, the effective per phase voltage is reduced to (1/1.732) times hence to maintain the torque/speed it will draw 1.732 times higher current.

Can you start a motor in Delta?

In star delta starting an induction motor is connected in through a star connection throughout the starting period. Then once the motor reaches the required speed, the motor is connected in through a delta connection. A star delta starter will start a motor with a star connected stator winding.

What does the 8th digit in a VIN number mean?

8th Digit: The 8th digit, in this case, a “Z,” is one of my personal favorites. It’s the engine size! So if you were to go to a junkyard, this digit is really helpful for vehicles that had two different engines during the same year. An S10 Truck or an S10 Blazer are perfect examples of this.

Is Baldor now ABB?

Beginning March 1, 2018, Baldor Electric Company, a member of the ABB group for more than seven years, will be known as ABB.

Are ABB and Baldor the same company?

Where are Nidec Motors made?

Who owns Nidec?

Plant Shigenobu Nagamori
Katsura Plant Shigenobu Nagamori, current Chairman of the board & CEO, established Nippon Densan Corporation (now Nidec Corporation) in Nishikyo-ku, Kyoto with a capital of 20 million yen.


1982 June stablished the Mineyama Plant in Mineyama-cho, Naka-gun, Kyoto.
1989 March Took a stake in Shinano Tokki Co., Ltd..

What does Nidec stand for?

Nippon Densan Corporation
Katsura Plant Shigenobu Nagamori, current Chairman of the board & CEO, established Nippon Densan Corporation (now Nidec Corporation) in Nishikyo-ku, Kyoto with a capital of 20 million yen. August. Started production and sales of small precision AC motors.