Does Pioneer VSX 822 have Bluetooth?

The VSX-822-K is fully ready for wireless Bluetooth audio from virtually any A2DP profile Bluetooth device.

Does Pioneer VSX 822 have arc?

Both devices support ARC. I have the HDMI out from the receiver to the appropriately labeled HDMI 3 port (ARC) of the TV. The receiver has ARC turned on as well as HDMI Control.

What is Pioneer VSX?

The VSX-534 AV Receiver features Dolby Atmos immersive sound at a price you will not find anywhere else. The VSX-534 comes in a user-friendly new design, with a 12% slimmer size than the previous model for easy installation, 4K indicator, and Personal Preset and Bluetooth® Input buttons on the front panel.

How do I set up optical on my Pioneer receiver?

Press the Home Menu button the remote (the one with the House), then select System Setup, then Input Setup. On the Input setup screen, arrow left or right until you get to the input you used for the Video, and then arrow down to Digital In, and select the appropriate Optical input (probably OPT-1).

What is the difference between Pioneer VSX and SC?

Like the SC Series, the Elite VSX Series of Pioneer AV receivers are still aimed at audiophiles and sound geeks. The main difference is that they don’t have the D³ amplifiers of the SC range. So, this is the place to go if you want a high-end Pioneer AV receiver but aren’t sold on the Class D amplification.

How do I reset my Pioneer VSX 822 K?

Switch the receiver into standby mode by holding down “Band” and then pressing and holding the “Standby/On” button for about two seconds. When you see “Reset?” appear on the display, press either the left or right arrow button or the “Auto Surround/Stream Direct” button until “OK?” is displayed.

Which is better HDMI or ARC?

While a regular HDMI connector is only able to transmit video images, ARC has an added function that allows you to transmit audio from a TV back to the source, like a receiver or soundbar. This means you only require a single 2.0b cable in order to transmit both video and audio signals.

Is optical input better than HDMI ARC?

HDMI ARC or digital optical audio? HDMI ARC is a better option. It supports Dolby Digital Plus, Dolby Atmos, and up to 7.1 channels of uncompressed audio while Digital Optical only supports Dolby Digital and up to 5.1 channels of uncompressed audio.

Is Pioneer better than Denon?

Pioneer is better if you’re a beginner because it’s a larger company, has more products, and thus has extensive support. If you’re intermediate, Denon is better because its controllers have more features. You can experiment more and upgrade faster as you get better (lower prices with Denon).

Is Pioneer high end?

Although not as popular as some brands, Pioneer AV receivers are high-quality and well worth considering if you are in the market for a receiver. Their receivers have two broad categories – the high-end Elite Series and the budget VSX Series.

Do I need both HDMI ARC and optical?

In short, if you have HDMI ARC on both your TV and soundbar, then use HDMI ARC. If you don’t have HDMI ARC, then use digital optical. Most soundbars support less than 5.1 channels of audio, so in terms of audio quality, there isn’t really a difference.

Is eARC better than arc?

Enhanced Audio Return Channel (also known as eARC) is the next generation of ARC. It’s a feature implemented in the most recent HDMI 2.1 specification. The main benefit of eARC is a big boost in bandwidth and speed. This allows you to send higher-quality audio from your TV to a soundbar or AV receiver.

What brand of receiver is best?

The top 11 best AV receiver brands are:

  • Denon.
  • Onkyo.
  • Sony.
  • Marantz.
  • Anthem.
  • Yamaha.
  • Integra.
  • AudioControl.

Why does my Pioneer receiver keep shutting off?

If a receiver is not getting enough current, it will turn itself off. If your receiver shares a wall outlet with another high-current appliance (such as a refrigerator, air conditioner, heater, or vacuum), the receiver may shut itself off when there is insufficient current.

Can I control my Pioneer receiver with my phone?

Pioneer ControlApp is an application that allows you to control selected Pioneer products with your iPhone, iPod touch, Android devices through your home network.

Can I use a regular HDMI cable for ARC?

Any HDMI cable will work universally for HDMI and HDMI ARC/eARC ports. Only a few very outdated HDMI cables could potentially struggle with some of the higher quality audio formats with eARC, but this is unlikely to happen.

Do I need a special HDMI cable for ARC?

Using HDMI ARC does not require a new HDMI cable. Any HDMI cable should be able to cope with the requirements – it’s only when we move on to eARC this could (potentially) become an issue.

Is Dolby Atmos better than optical?

Most soundbars support less than 5.1 channels of audio, so in terms of audio quality, there isn’t really a difference. But if your soundbar supports more than 5.1 channels of audio, Dolby Atmos and/or DTS:X, then a digital optical cable will severely limit the audio quality of the system.

Is optical louder than HDMI?

The major difference is that HDMI cables can pass higher resolution audio which includes formats found on Blu-ray like Dolby TrueHD and DTS HD Master audio. Fiber optic cables won’t be able to transmit these high-res sound formats.

Is Pioneer the same as Panasonic?

Panasonic tends to have more bells and whistles, but the Pioneer decks tend to be more reliable and last longer in the end. or has a different head unit that they think is good that looks cool and is decent in sq and no mre expensive then like $230.

Is sound better through optical or HDMI?

The biggest difference is that HDMI can pass higher-resolution audio, including the formats found on streaming services such as Dolby Atmos and DTS HD Master Audio. These formats can’t be transmitted across optical. In terms of simplicity, HDMI also passes video signals.

What has better sound quality optical or HDMI ARC?

HDMI ARC is a better option. It supports Dolby Digital Plus, Dolby Atmos, and up to 7.1 channels of uncompressed audio while Digital Optical only supports Dolby Digital and up to 5.1 channels of uncompressed audio.

Can you get Atmos with just ARC?

If you want this level of functionality, you’ll need HDMI eARC. ARC can, however, allow you to receive Dolby Atmos audio from streaming services such as Netflix, Disney Plus and Amazon Prime Video, as these services embed Dolby Atmos in the lossy Dolby Digital Plus format which ARC can handle.

Can I get Atmos with HDMI ARC?

Most Dolby Atmos audio can be played through HDMI-ARC using the Dolby Digital Plus codec. HDMI-eARC is required to play lossless Dolby Atmos audio using the Dolby TrueHD codec.

What are the top 5 stereo receivers?

According to rigorous research and review conducted by our team of experts, in order, the top five stereo receivers are the Sony STRDH190, Yamaha R-S202BL, Marantz SR5015, Onkyo TX-SR393, and the Denon DRA-800H.

Unleash your Smartphone’s Music with Bluetooth

The VSX-822-K is fully ready for wireless Bluetooth audio from virtually any A2DP profile Bluetooth device.

How do I turn off Zone 2 on my Pioneer receiver?

You can turn on or off the power for zone 2 by the following procedure. Select [Settings] – [Zone Settings] from the home menu. Select [Power]. Select [On] or [Off].

How do I use Zone 2 on my Pioneer receiver?

Every time you want to control Zone 2 when you are in the main zone, you need to press the Zone 2 button on the remote. To switch back to the main zone press the receiver button, and then the source you are listening/watching on the main zone and this will give you control of your main zone.

Below you will find the product specifications and the manual specifications of the Pioneer VSX-822.

Technical details.

Audio decoders Dolby Digital Plus,Dolby Pro Logic IIz,Dolby TrueHD,DTS-HD Master Audio
x.v.Color support
Audio Return Channel (ARC)

How do I change the zone on my Pioneer receiver?

Pioneer user manual

  1. Press the MULTI-ZONE ON/OFF button on the front panel.
  2. Press CONTROL.
  3. Use the INPUT SELECTOR dial to select the source for the zone you have selected.

How do I turn off Denon Zone 2?

Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit. Press the input source select button to select the input source to be played.

Can Zone 2 be used for Atmos?

Re: Denon Zone 2 Help & Opinion Dolby Atmos
You can only do 7.1 and for zone 2 you need to get an external amp and connect it to the zone 2 on the Denon pre out with the speaker cables connected to the external amp. In other words the Denon can only do 7.1 or 5.1. 2 (Atmos) on that main zone.

What does FL OFF mean on my Pioneer receiver?

The receiver suddenly switches off or the FL OFF indicator blinks. There is a problem with the receiver’s power unit or fan. Try turning on the power. If the same thing happens, the receiver is damaged. Unplug the receiver from the wall and call a Pioneer authorized independent service company. (

How do I reset my Pioneer VSX receiver?


How do I hook up an old Pioneer receiver to my TV?

Go to Parts and Accessories.

  1. Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV.
  2. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system.
  3. Turn on your TV.

What is the difference between Zone 2 and Zone B?

Zone 2 allows for an independent analog source/volume while the Front B will play the same source/volume as the Front A speakers (ie. Front A volume also controls the Front B speaker volume).

What is Zone B line out?

• Zone B line-out shares any audio source to components with. an RCA input, such as mini hi-fi systems, integrated amps, wireless headphone docks, etc. • DSP-controlled Vocal Enhancer function boosts dialog audibility. via remote keys or front-panel controls.

What is Zone 2 for on a receiver?

The zone 2 feature allows this receiver to send a second source signal to a separate audio system in another location. For example, you can watch a DVD in the main zone, while others can listen to a CD in zone 2 at the same time.

How do you control zone 2 on a Denon receiver?

Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit. Press the input source select button to select the input source to be played. The audio signal of the selected source is output to ZONE2. To perform an operation with the main unit, press ZONE2 SOURCE.

Can you use Zone 2 for subwoofer?

The sub should have speaker wire inputs. Just use those and the sub will work fine with the zone 2 volume control.

What is line-out Zone 2?

Line-Out Zone 2
The added speakers then connect to the external amplifier. 7.1 channel receivers that include line-out Zone 2 capability enable the full 7.1 channel option in the main room while operating a separate Zone 2 with external amplifiers.

How do I reset my Pioneer receiver?

How do I hook up speakers to my Pioneer receiver?

Connect the optical cable to the back of your TV, and to your receivers TV Audio Optical.

  1. Connect each speaker to your receiver. Keep in mind that the red and black cables must match your speakers.
  2. Connect your subwoofer. This tends to be a single RCA cable.

How do I factory reset my pioneer?

How to restore and reset your Pioneer DEH radio – YouTube

Can you get Dolby Atmos without eARC?

No, eARC is not required for Dolby Atmos to work. Dolby Atmos can work with regular HDMI ARC through the Dolby Digital Plus audio codec. However, those wanting Dolby Atmos TrueHD must use eARC. You can also bypass ARC entirely by connecting the media device directly to the soundbar or AV receiver.

Can you get Dolby Atmos through ARC?

If you want to transmit Dolby Atmos from your TV to your AV receiver or soundbar, your TV must be equipped with at least HDMI ARC. As we mentioned above, HDMI ARC works with Dolby Atmos/Dolby Digital Plus, but if your TV is equipped with the newer HDMI eARC standard, it will also work with Dolby Atmos/Dolby TrueHD.

What is audio PCM mode?

Pulse-Code Modulation (PCM) and the Dolby Digital® technology refer to different types of digital audio recordings. PCM is the conventional method for converting analog audio into digital audio. The PCM audio recorded on DVD is a two-channel digital, stereo audio track.