Are all 5050 LEDs the same?

The different numbers correlate to the different physical dimensions of the chip. The numbers 5050, 3528, 2835, etc correlate to the size of the chip in millimeters. Some LEDs are brighter than others and some give off more light per watt. The LED chip you will need will depend on your project.

How bright is a 5050 SMD LED?

The 5050 LED chip explained

5050 LED chips are often used on 60 LED-per-metre strip lights, pulling 14.4 watts at 24 volts (commonly called 14.4w p/m or 15w p/m LED tape). With an output of around 990-1080 lumens per metre, depending on colour, this tape gives you a smooth, bright effect when shining onto a surface.

How much current does a 5050 LED draw?

Chip type: 5050, 60LEDS per meter (RGBW)
Power consumption: Will vary between 9.6 and 14.4W/m depending on controller. Heat sink: Recommended when using the Strip at full intensity for more than 4 hours.

Which is brighter LED 5050 or 3528?

5050 chips are typically 3 times as bright as 3528 chips. Because they’re brighter, strips with 5050 chips are typically used for what we call ‘task lighting’, and commonly used underneath kitchen cabinets where that light will help you see what you’re working on.

Which is better SMD or LED?

Although a COB LED is efficient, an SMD LED has an even greater level of efficiency. That’s because more lumens are produced per watt. In other words, you’ll receive more light with less wattage. An SMD LED also produces a broader light beam, which means the light doesn’t need as large of a heat sink as a COB LED does.

What is the difference between SMD 3528 and SMD 5050?

The 3528 typically contains a single 20 mA LED chip (approximately 0.06 Watts) and a 5050 typically contains three 20 mA LED chips (approximately 0.2 Watts). Therefore, a single 5050 LED package has the capacity of 3x 3528 LEDs.

Is 5050 LED good?

The 5050 diodes are best suited for single color applications because of their intense brightness; if they were to use flashing colors, it would create eye issues for anyone staring at them. The 5050 LED uses about 60mA of power, has a surface area of 25mm squared, and a brightness of 22 lumens.

How do you wire a SMD 5050 LED?

5050 SMD LED Demo – YouTube

What is the difference between 5050 and 3528?

What is the brightest SMD LED?

SMD (Surface Mounted) 5730 series is the brightest LED strip because it contains powerful LEDs that can create a lot of light.

Which is brighter SMD or LED?

The light produced by the SMD (Surface Mount Diode) is much brighter when compared to the normal LED lights. Not only the SMDs are brighter than the normal LED lights, but also, offer a better and wider spectrum when compared to the SMD lights.

Which is brighter 5050 or 5630?

The 5050 and 5630 SMD LEDs are two types of SMD LEDs commonly used in home and commercial lighting. A 5050 LED diode will illuminate the equivalent of about 18 lumens. 5630 is brighter than 5050, so it consumes more wattage.

How many LEDs are in a 5050 LED strip?

5050 SMD Explained
The 5050 LED chip is most commonly used on LED tapes with 60 LEDs per metre, pulling 14.4w and at 24v (known as 14.4w p/m or 15w p/m LED Tape). 60 of these LEDs p/m will produce a Lumen output of around 990-1080 (depending on the colour), giving a smooth, bright effect when shining onto a surface.

Which SMD is the brightest?

In technical terms, SMD 5730 series are the brightest of all. But, do you know what do they mean? Practically, all LED strip lights are provided with certain code names like 5730, 5050, 3014 etc. These numeric terms are basically the physical dimensions of LED strips; for instance, 5050 refers to 5mm x 5mm.

What are the 3 wires on LED lights?

This means marker light, running light, brake light or blinker. In this case one of the wires will be ground (-) and the other is positive(+). Generally a white and a black wire will be provided. The white will normally be the ground(-) and the black will be the positive(+).

What are the 4 wires on LED lights?

RGB strip light has a 4-wire connection, where green, red and blue are for the green, red and blue LEDs, and the black/white wire is the common +12V connection.

Is 5050 led good?

What is the best LED SMD?

What is the Best SMD Chip?

  • 3528 SMD CHIP. The 3.5mm x 2.8mm chip is one of the most popular, due to its cost effectiveness and the fact that it doesn’t give off much heat.
  • 5050 SMD CHIP. 5.0mm x 5.0mm are known as having ‘tri-chips’ simply meaning that they have 3 LED diodes in one housing.
  • 2835 SMD CHIP.
  • 5630 SMD CHIP.

Is higher SMD better?

With this in mind, you can assured that both SMD and COB LEDs will be extremely energy efficient. But pay attention that the energy efficiency varies according to the lumens used. The higher the lumen measures, the greater the energy efficiency is.

What happens if an LED is wired in backwards?

LEDs, being diodes, will only allow current to flow in one direction. And when there’s no current-flow, there’s no light. Luckily, this also means that you can’t break an LED by plugging it in backwards. Rather, it just won’t work.

Which wire on an LED is positive?

For LEDs, the red wire should be positive and the black wire negative. That’s it.

Will reverse polarity damage LED?

If LEDs are reverse-connected to a sufficiently low voltage supply it is possible that they will simply conduct no current, emit no light and suffer no damage. In such cases correcting the polarity will result in correct LED operation with no adverse effects.

Which leg of an LED is positive?

LED polarity
For an LED to work it needs to be connected to a voltage source with the correct side. The voltage supply side of the diode is the positive (+) side, this is called the anode. The negative side is called the cathode.

What happens if an LED is wired backwards?

1) Polarity Matters
LEDs, being diodes, will only allow current to flow in one direction. And when there’s no current-flow, there’s no light. Luckily, this also means that you can’t break an LED by plugging it in backwards. Rather, it just won’t work.

What happens if LED polarity is reversed?

Incorrect polarity connection that has caused LED failure will typically result in no light emission and open-circuit LEDs. This could result in signatures ranging from no naked-eye/visible signs of damage to physical damage including signs of burn/overheat.