Why is it called Ford Y-block?
The engine is well known and named for its deep skirting, which causes the engine block to resemble a Y. It was introduced in 1954 as a more modern replacement for the outdated side-valved Ford Flathead V8 and was used in a variety of Ford vehicles through 1964.
When did Ford stop making the Y-block?
The End of the Y-Block
Ford introduced its big block FE engine on larger cars in 1958. The new V8 replaced the Y-block with the Windsor small block in 1962, but the engine lived on overseas until as late as 1982 in passenger cars, and 1986 in pickup trucks.
What year did the Y-block engine come out?
The Lincoln Y-block V8 engine was Ford’s earliest OHV V8 engine, introduced by Lincoln in the 1952 model year. Like the later and better-known but even more short-lived Ford Y-block engine, its block’s deep skirts gave the block the appearance of the letter Y from the front.
How much horsepower does a Ford 292 have?
Ford F-Series F-100 IV 4.8 292 V8 (160 Hp) Automatic 1960, 1961, 1962, 1963, 1964 Specs
|Fuel Type||Petrol (Gasoline)|
|Power||160 Hp @ 4000 rpm.|
|Power per litre||33.4 Hp/l|
Was the Ford Y-Block a good engine?
Otherwise, the Y-Block proved to be a rugged and reliable engine, and while it was replaced by the Windsor V8 for passenger car use in 1962, it continued as a mainstay in the Ford truck line for several more years.
How do I identify a Ford Y-Block?
The best way to identify a 312 externally is by checking the flywheel flange on the crankshaft. The 312 ECZ crankshaft has an aspirin-sized dot on the outer edge. If the engine is disassembled, check the casting number on the main cap. ECZ is cast into 312 main caps; all others are EBU.
How do you find Y-Block heads?
Y-Block Cylinder Head Casting Numbers
Cylinder head casting numbers can be found under the valve cover on early heads, between the exhaust ports on some heads or under the water passage to the intake manifold. The # 6090 is the Ford code for “cylinder head” it is on all of them and means nothing.
Was the Ford Y-block a good engine?
How much horsepower does a 312 Ford engine have?
|Engine manufacturer:||Ford Y-block OHV V-8 312|
|Horsepower gross:||223.5 kW / 304 PS / 300 hp (SAE gross)|
|Torque gross:||595 Nm / 439 ft-lb|
What is Ford’s biggest V8 engine?
The Ford Motor Company has built nearly every kind of V8 engine we can imagine over the past century, but the biggest was the 1100 CID GAA tank engine of World War II.
What is Ford’s best engine?
Voodoo V8 is one of the most powerful and the best engines produced by Ford. The company presented its engine called Cayote 5.0 V8 in 2010, and it was called the best modern engine at the time. Coyote V8 featured different modern components such as a 32-valve head, variable valve timing system, and much more.
What years are Ford diesel engines to avoid?
What Makes These Ford Diesel Engine Years Worth Avoiding?
- 2003 to 2007 Powerstroke 6.0L Problems: From the start, the 6.0L Powerstroke engine in the Ford SuperDuty diesel truck from 2003 to 2007 has experienced serious trouble.
- 2011 to 2014 Powerstroke 6.7L Problems:
Where is the engine number on a Ford Y block?
NOTE: 6015 is Ford’s number for an engine block. All blocks have this number. Block identification number generally on side of block above oil filter for blocks cast at Cleveland. Dearborn block I.D.
How do I decode a Ford casting number?
In order, here is what each digit in a Ford part or casting number represents:
- DIGIT #1—DECADE OF MANUFACTURE: A – 1940.
- DIGIT #2—YEAR OF THE DECADE:
- DIGIT #3—CAR LINE:
- DIGIT #4—ENGINEERING OFFICE RESPONSIBLE FOR ORIGINAL DESIGN:
- DIGITS #5-9—BASIC PART NUMBER:
- DIGITS #10-12 (SUFFIX)—DESIGN CHANGE:
- TYPICAL DATE CODE:
Was the Ford Y block a good engine?
How do I know what Ford head I have?
1 Look for three different locations where your Ford cylinder head code number will be located: on top of the head under the valve cover; on the bottom of the head, requiring the head to be removed; and on the side of the head just under the valve cover lip.
What years did Ford make the 292?
John goes on to tell us the 292 blocks from 1955 to 1964 are easier to find. In fact, improvements were made to 292 and 312 blocks in 1959 with deeper drilled main cap threads for added strength. The 1961 to 1964 C1AE and C2AE blocks have additional material in the main webs for added strength.
What car has the 7.3 Godzilla engine?
Ford however promises class-leading fuel economy, performance and reliability. The Ford 7.3L Godzilla engine powers the following vehicles: Ford Super Duty.
|Max power @ RPM||430 hp @ 5,500 rpm|
|Max torque @ RPM||475 lb-ft @ 4,000 rpm|
|Cylinder head||Cast aluminum|
What vehicle has the 7.3 Godzilla?
Displacement is King
When you think of heavy duty truck performance, a Diesel engine is the first thing that comes to mind. But now that Ford offers its new 7.3 liter “Godzilla” V8 as an option in its Super Duty pickups, there’s a new option on the table.
What is the most reliable engine ever built?
So here we are to show you the most reliable engines ever made.
- 8/10 Honda B Series Engine.
- 7/10 Honda K Series Engine.
- 6/10 Lexus 1UZFE Engine.
- 5/10 Lexus 2UR-GSE Engine.
- 4/10 BMW M57 Diesel Engine.
- 3/10 Nissan RB26DETT Engine.
- 2/10 Mercedes-Benz OM617 Diesel Engine.
- 1/10 General Motors LS Engine.
What is a Ford voodoo engine?
The Voodoo is a 5.2-liter, naturally aspirated V8 engine from Ford Motor used to power sports cars like the Ford Mustang Shelby GT350/350R. Featuring a dual overhead cam (DOHC) design, in a V configuration, the Ford Voodoo architecture has been part of the Ford Modular family since 2015.
What is the most unreliable diesel engine?
Introduced mid-2003, the Ford 6.0L turbo is by far the worst modern diesel engine. It’s so bad, in fact, that Navistar (Powerstroke’s parent company) and Ford had a legal battle over it. The list of issues ranges from head gasket problems to catastrophic fuel system failures.
What is the most reliable Ford diesel engine?
7.3L Ford Power Stroke (#1 Reliable Diesel Engine)
After several decades, the 7.3L Powerstroke is regarded as the most reliable diesel engine among its sophisticated counterparts. This diesel engine was a product of the joint venture between International Navistar (now Navistar International) and Ford.
How do you identify Ford Y-block?
If the engine is disassembled, check the casting number on the main cap. ECZ is cast into 312 main caps; all others are EBU. Regardless of the source, the external dimensions of all Ford Y-Blocks are the same.