What is BlueTrack mouse?

BlueTrack combines ‘specular’ optics with a blue LED beam, rather than using the red LED of optical mice or the laser of laser mice. Microsoft says BlueTrack “combines the benefits of optical (which has a very powerful beam but is imprecise and blurry) with laser, which is clearer but has a narrower beam.”

Can you pair a Microsoft wireless mouse with a different USB?

Unfortunately, you cannot pair it to any USB receivers since the mouse and its USB receiver were matched and mated to one another and Microsoft don’t have “Unifying Receivers” that will let you pair the Mouse to a different one.

How do I sync my Microsoft wireless mouse with a different USB receiver?

Press and hold the “Connect” buttons on the underside of the receiver and the mouse for several seconds. The “Connect” button sets up the wireless connection between the mouse and the receiver.

How do I reset my Microsoft USB mouse?

If the charging light turns red or flashes red after several seconds, follow these steps:

  1. Disconnect the device from the charging connection.
  2. Turn off the device.
  3. Remove the batteries from the device.
  4. Wipe the batteries by using a clean, soft cloth.
  5. Wait 10 seconds.
  6. Turn on the device.

Is BlueTrack better than laser?

BlueTrack works much better than the laser mouse on clear glass, but it still isn’t a good experience. The 4000’s box specifically says that it works on carpet.

What’s the difference between optical and laser mouse?

The key difference between an optical mouse and a laser mouse is their illumination source. An optical mouse uses an infrared LED light to illuminate the surface. A laser mouse illuminates the surface with a laser beam.

Can I use Microsoft mouse with different receiver?

One mouse can not work with another receiver or vice versa. One is lost, other becomes useless. My apologies. The only way is to buy a new mouse/receiver combination and discard this mouse.

How do I resync my mouse with my USB receiver?

Resyncing the setup is fairly easy. There is usually a Connect button somewhere on the USB receiver. Press that, and a light on the receiver should start flashing. Then press the Connect button on the keyboard and/or mouse and the flashing light on the USB receiver should stop.

How do I program my mouse to my new receiver?

To do this on a Windows 10 PC, go to Settings > Devices > Add Bluetooth. On your mouse, press the Connect button; the device should appear as an available Bluetooth device on your screen. Select it to complete the pairing process and use your mouse.

Where is the reset button on a Microsoft wireless mouse?

How to Reset Microsoft Mouse

  1. The reset button is located, which is typically next to the batteries on the inside or on the bottom of the mouse.
  2. Push the button and keep it on hold for 3 to 5 seconds using small, pointed objects such as the tip of the ballpoint pen or the straight pin. Then the reset is completed.

How do I fix an unresponsive wireless mouse?

Check to be sure the batteries are inserted correctly, and that they’re not simply worn out. Fresh batteries are the cure for many wireless mouse problems. Power switch: Many mouse devices have a switch on the bottom, so that you can turn them off and save your battery when not in use.

What is the best tracking method for a mouse?


A laser is strong enough to bounce light off all the little nooks and crannies that are present on top of the surface and in the underlying surface layers. The reflections will have more light variances, which makes it easier for the mouse to track the movement of the surface.

What is better for a mouse optical or laser?

Optical mice have a resolution of around 3,000 dpi, while laser mice have a resolution between 6,000 and 15,000+ dpi. Since laser mice have a higher dpi, these devices track more dots per inch and are more sensitive. This may have been an issue in the past, but the average user probably can’t tell the difference.

Is ball mouse better than optical?

In this regard, the laser mouse is the more high-tech choice because of its fast processing rate. While both of them are much more advanced than a trackball mouse but the laser mouse has the added edge of a faster operation.

What is the benefit of an optical mouse?

Optical mice have several benefits over wheeled mice: No moving parts means less wear and a lower chance of failure. There’s no way for dirt to get inside the mouse and interfere with the tracking sensors. Increased tracking resolution means smoother response.

Can I buy a new receiver for my wireless mouse for Microsoft?

Every receiver is coded to get signal from its corresponding keyboard and mouse. Somebody else’s receiver for the same model will also not work. This is set in the factory itself. Hence, it is not possible to get a replacement.

How do I resync my Microsoft wireless mouse?

Press and hold the pair button on the bottom of the mouse until the LED light starts to flash (about 5 seconds). On your Windows 10 PC, select Connect if a notification appears for your mouse, then wait for it to get set up.

How do I put my Microsoft mouse in pairing mode?

Press and hold the pairing button on your mouse or keyboard for 5-7 seconds, then let the button go. The light will blink to show that the mouse is discoverable. The pairing button is usually on the bottom of the mouse. On your PC, select Start > Settings > Devices > Bluetooth & other devices.

Can a mouse dongle be reprogrammed?

To reprogram your dongle you need to have the dongle plugged in, the WIBU-KEY drivers installed, and the Chaos License Server installed and running. You can download the latest version of the License Server from our web site. If you do not have the necessary licenses on your dongle, it will have to be reprogrammed.

How do I connect my Microsoft wireless mouse without a USB receiver?

How to connect the Bluetooth device to the computer

  1. Press and hold the Connect button on the bottom of the mouse.
  2. On the computer, open the Bluetooth software.
  3. Click the Devices tab, and then click Add.
  4. Follow the instructions that appear on the screen.

Where is the reset button on wireless mouse?

Switch on the power switch on the bottom of the mouse by turning your mouse over. Your computer should be turned on as well. For resetting a wireless mouse, the USB receiver is also reset to ensure the proper functionality. The reset button is located on the receiver, which is typically on the underside.

How do I get my computer to recognize my wireless mouse?

Is an optical mouse better or laser?

The CMOS sensor won’t be able to recognize any variations in the light pattern. That’s why optical mice don’t work well on highly reflective surfaces. They’re much better suited for a non-glossy surface, like a mousepad. A laser is much more powerful than an LED light.

Which mouse brand is the best?

The Best Mouse – Fall 2022 Reviews

  • Best Mouse. Logitech MX Master 3S.
  • Best Upper Mid-Range Mouse. Logitech MX Master 2S.
  • Best Mid-Range Mouse. Razer Basilisk V3.
  • Best Budget Mouse. Logitech G305 LIGHTSPEED.
  • Best Mouse For Gaming. Razer Viper V2 Pro.
  • Best Mouse For MMO Gaming. Razer Naga Pro.
  • Best Mouse For Travel.
  • Best Mouse For Mac.

What type of mouse is more accurate?

Wired Mouse
They also tend to be more accurate than other designs. This can make wired mice models great for gamers, digital artists and other users who rely on high accuracy.