How much does a 24 inch Craftsman snowblower weigh?


Product Length 24 in
Product Height 43 in
Power Source Gas
Product Weight 191 lbs

How do you keep snow from sticking to snowblower auger?

The great routine every year before you use your snowblower is to soak the chute in the panel’s with a silicon spray.

Where is Craftsman snowblower model number?

Snow-blower model numbers are located on the backside of the metal base between the left and right rear-wheels. The 11-character model number is printed on the left side of the Product Identification Label and will begin with the letters “CM”.

What company manufactures Craftsman snowblowers?

When you’re shopping for a snow blower, it’s important to know that there are only a few manufacturers. A company called MTD makes Craftsman, Cub Cadet, and Troy-Bilt models. The Husqvarna company makes units under the Husqvarna, Jonsered, and Poulan Pro brands. Ariens makes Ariens and Sno-Tek models.

How many horsepower is the Craftsman 24 inch snowblower?

Craftsman 88175000 7.5 hp 24″ path Two-stage Snowblower.

How many HP is 179cc?

5-6 HP

A powerful 179cc 4-cycle OHV Craftsman® engine kicks-out 5-6 HP, while eliminating the need to mess-around with fuel ratios, just gas it and get to work.

Should I spray Pam on my snowblower?

A. Yes, it will prevent snow from sticking to the surface.

Should I spray my snowblower with wd40?

Can I use WD-40 on a snowblower? You can use WD-40 to help lubricate the snowblower chute. It’s easy to apply, dries quickly, and acts as both a water repellent and corrosion inhibitor.

How do I tell how old my Craftsman snowblower is?

How Do I Determine the Age of a Craftsman Snowblower?

  1. Find the decal attached at the rear of the snow thrower housing.
  2. Find the manufacture date printed directly below the model number.
  3. Visit a Sears store and request the manufacture date using the serial number.

Who made Craftsman snowblowers for Sears?

It’s labeled “Sears” but is actually made by Tecumseh. Like the Tecumseh tags, this one has a 4-digit “D.O.M.” code which means “date of manufacture”. In this case, the number 8258 means the engine was made on the 258th day of a year ending with the digit “8”, such as 1998 or 2008.

Who made older Craftsman snowblowers?

Craftsman (older model by Murray)
Ariens also made some early 2000s John Deere machines based on Ariens’ 932-Series, with Ariens’ signature square snow box.

What is the best snow blower on the market today?

And whatever you do, don’t forget your snow boots.

  • Best Overall Snow Blower: Toro Power Max 824 OE.
  • Best Budget Snow Blower: Greenworks Corded Snow Thrower.
  • Best Two-Stage Snow Blower: Ariens Classic Two-Stage Snow Blower.
  • Best Blower For Heavy Snow: Ariens Deluxe Two-Stage Snow Blower.

How many horsepower is 208cc?

This 208cc engine features 6.5 Gross Horse Power.

How many horsepower is the craftsman 24 inch snowblower?

Does wd40 prevent snow from sticking?

This Old House recommends spraying the exit chute with a silicone (like WD-40® Specialist® Water Resistant Silicone Lubricant) to keep snow from sticking. When you are finished clearing snow, let the snowblower run for a few minutes to dry out to prevent parts from being damaged by freezing.

Is seafoam good for snow blowers?

Snow Blower Tip #1
By adding Sea Foam to every tank of new fuel you can eliminate the three most common snow blower engine problems: HARD STARTS: Sea Foam helps engines start fast by holding a fuel’s flashpoint. Sea Foam helps to protect fuel from evaporation and the loss of light ignition vapors.

Where are Craftsman snow blowers made?

WILLARD, OHIO WITH GLOBAL MATERIALS. Proudly manufacturing select CRAFTSMAN Riding Mowers and Snow Blowers using global materials.

Does Husqvarna make Craftsman snowblowers?

Husqvarna also makes Poulan Pro, Jonsered, and some Craftsman snow blowers, among others.

How deep should snow be to use a snowblower?

Single-stage snow blowers typically max out at a depth of 6 to 9 inches, and even the strongest machines will struggle when snow is more than 16 inches deep.

How long should snowblower last?

Snow blowers can last several years, even decades, if they’re maintained regularly and correctly. Snow blower maintenance varies based on the type of snow blower you have, either a two stage snow blower or a single stage snow blower.

How many cc’s is a 6.5 HP motor?

6.5 HP (212cc) OHV Horizontal Shaft Gas Engine, EPA.

How many cc is a 13 HP motor?

13 HP (420cc) OHV Horizontal Shaft Gas Engine EPA Special.

How do you get old gas out of a snowblower?

Sawchuk suggests using a store-bought gas siphon or a turkey baster to remove most of the gas, then running your snow blower until the tank is dry and the machine stalls out. The gas that you’ve removed from your snow blower can be funneled right into your car.

Can I put carb cleaner in my snowblower gas tank?

How To Fuel Treat Your Snow Thrower – Ace Hardware – YouTube

Who owns Craftsman now?

Stanley Black & Decker
Yes, Craftsman and DeWalt are Owned by Stanley Black & Decker. Stanley Black & Decker (SBD) turned heads when it bought Craftsman Tools in 2017 after Sears closed 235 stores in 2015. The company owns many brands, however.